RC-Monster Forums - View Single Post

Bondonutz · 04:37 PM

I don't know about anybody else but I've wasted a few spur gears the last 8-10 months and finially decided to remedy the situation. Landing very large jumps or botched landings the motor mount plate will flex and chip a tooth or two of the spur gear and heres a simple easy fix. I will be testing this mod Weds.
All thats needed is a P2 pushrod and some hardware and a 1/8" bit and drill.

	(#1)
Bondonutz Fat Kid Engineering Offline Posts: 3,634 Join Date: Jun 2009 Location: Hot as Hell West Central Coast Florida	ERBE Motor Plate Brace - 08.18.2009, 04:07 PM I don't know about anybody else but I've wasted a few spur gears the last 8-10 months and finially decided to remedy the situation. Landing very large jumps or botched landings the motor mount plate will flex and chip a tooth or two of the spur gear and heres a simple easy fix. I will be testing this mod Weds. All thats needed is a P2 pushrod and some hardware and a 1/8" bit and drill. I retired from RC, now life is all about guns and long range shooting. Last edited by Bondonutz; 08.18.2009 at 04:37 PM.