RC-Monster Forums - View Single Post

Chadworkz · 01:11 PM

As soon as I get my UE diff outputs and UE 8mm CVDs from Lito, I will be able to complete my SMG! Well, I also have to get my Tekin RX8 ESC & Tekin T8 2250kV Motor as well!

Kcaz25, I am not going to mount my motor on the transmission, so I won't have to worry about flexing the transmission...I am going to custom-build a motor-mount to mount the motor as low as possible in front of the spur gear. I am also giving delrin spur gears a try, to see how well they hold up to extra-hard pinions and extreme brushless power!

Truck is looking good, River!

Edit: I have a question, do you guys think delrin body posts would be strong enough? I have like 6 feet of the correct diameter delrin rod that I would like to use.

	(#307)
Chadworkz UE Supermaxx Addict! Offline Posts: 1,006 Join Date: Feb 2009 Location: Gadsden, Alabama	08.22.2009, 01:06 PM As soon as I get my UE diff outputs and UE 8mm CVDs from Lito, I will be able to complete my SMG! Well, I also have to get my Tekin RX8 ESC & Tekin T8 2250kV Motor as well! Kcaz25, I am not going to mount my motor on the transmission, so I won't have to worry about flexing the transmission...I am going to custom-build a motor-mount to mount the motor as low as possible in front of the spur gear. I am also giving delrin spur gears a try, to see how well they hold up to extra-hard pinions and extreme brushless power! Truck is looking good, River! Edit: I have a question, do you guys think delrin body posts would be strong enough? I have like 6 feet of the correct diameter delrin rod that I would like to use. -Chad › PM ME IF YOU HAVE THE BELOW: › VBS, CVDs, GM Single-Speed, OTB, Ultramaxxed, Super6, Strobe, Sprong, CNR Brake, UE Hex, DUH Towers, Predator, Blackbird, GA Blue Screws, HCR F/R Skids & Mutant Last edited by Chadworkz; 08.22.2009 at 01:11 PM. Reason: ** Needed to ask a question...*