RC-Monster Forums - View Single Post - brushless 1/5 4wd conversion about to begin! couple questions.

KaztheMinotaur · 05:45 PM

I hope so. I had to take more out than I wanted to...

I'm going to mount my motor in place of the stock radio box also. That is probably the best way. Otherwise it would be too tight with both batteries on both side.

I'm going to make another front chassis plate out of an old street sign that I have laying around. That is thinner than stock but I
think it will hold.

I broke my dremel this morning....

I got the screw on thing that goes over the mandrel stuck on the shaft. I couldn't get it off so I took it apart so I would have more to grab onto. When I put it together and turned it on it let out the magic smoke... I was not happy...

	(#6)
KaztheMinotaur RC-Monster Carbon Fiber Offline Posts: 351 Join Date: Dec 2007 Location: Central PA	08.25.2009, 05:30 PM I hope so. I had to take more out than I wanted to... I'm going to mount my motor in place of the stock radio box also. That is probably the best way. Otherwise it would be too tight with both batteries on both side. I'm going to make another front chassis plate out of an old street sign that I have laying around. That is thinner than stock but I think it will hold. I broke my dremel this morning.... I got the screw on thing that goes over the mandrel stuck on the shaft. I couldn't get it off so I took it apart so I would have more to grab onto. When I put it together and turned it on it let out the magic smoke... I was not happy... Last edited by KaztheMinotaur; 08.25.2009 at 05:45 PM.