RC-Monster Forums - View Single Post

magman · 10:07 PM

The conversions are really quite easy...couple of options. Either buy a complete kit which is a bit more work seeing as you have to remove both ends of the truggy and put the whole thing together...which is still easy...or do as most of us here have done...

1. remove old nitro junk
2. remove center diff and replace rear support w/new motor mount/support
3. instally batt. tray...may require drilling a couple of holes
4. mount everything and program esc and done!

This way is very easy and quicker IMO.

	(#7)
magman RC-Monster Dual Brushless Offline Posts: 4,236 Join Date: Dec 2007 Location: Cape Cod, Mass.	08.29.2009, 10:03 PM The conversions are really quite easy...couple of options. Either buy a complete kit which is a bit more work seeing as you have to remove both ends of the truggy and put the whole thing together...which is still easy...or do as most of us here have done... 1. remove old nitro junk 2. remove center diff and replace rear support w/new motor mount/support 3. instally batt. tray...may require drilling a couple of holes 4. mount everything and program esc and done! This way is very easy and quicker IMO. 1. MBX-6 T8 1900KV, RX8 ON 4S 2. MBX-5T 1520, MMM ON 5S 3. MBX-5 ONROAD CONVERSION 1515, MMM ON 5S 4. MRX-3 ON ROAD CONVERSION 1512, MMM ON 6S 5. TEN T 2650 T8, MMP ON 3S Last edited by magman; 08.29.2009 at 10:07 PM.