RC-Monster Forums - View Single Post - Would twin brushless setup with dual MMM's work withmy set up?

_paralyzed_ · 08.30.2009, 02:31 AM

If you are stuck with 6s and the MMM your last setup seems to be the way to go. You may be near the limit of the MMM.

I'd go for a 1600/kv ish 1521 (or even 1527, go big!) and a 12s plane esc. They have drag brakes, your vehicle will stop! The CC HV110 is the boss, but a hobbycity "turnigy" unit has been proven to work well.

although the braking requirements of the ISC may not be met.

With 6s you'll really be pushing all of the components.

	(#9)
_paralyzed_ working on a brushless for my wheelchair..... Offline Posts: 4,890 Join Date: Mar 2007 Location: minnesnowta	08.30.2009, 02:31 AM If you are stuck with 6s and the MMM your last setup seems to be the way to go. You may be near the limit of the MMM. I'd go for a 1600/kv ish 1521 (or even 1527, go big!) and a 12s plane esc. They have drag brakes, your vehicle will stop! The CC HV110 is the boss, but a hobbycity "turnigy" unit has been proven to work well. although the braking requirements of the ISC may not be met. With 6s you'll really be pushing all of the components. _______________________________________ It's "Dr. _paralyzed_" actually. Not like with a PhD, but Doctor like in Dr. Pepper.