RC-Monster Forums - View Single Post

Bondonutz · **HOBAO Hyper 9E Build complete -** 08.30.2009, 05:18 PM

Just finished this afternoon, Happy to report this is a well built buggy and engineering is excellent. It comes ATR, The shocks have to built and electronics installed. I torn it down completely to change diff viscositys to
5K/F-5K/C-3K/R and checked all the hardware. It was all tight and loctite was used everywhere. They did a great job at the factory. The directions were a little hit and miss, a novice builder would find difficultys in some areas.
Set up is as follows; NEU 1515-1Y & M.M.M. geared 40/13,weight is 7.5lbs w/4000mah 4s and body,JR DS8711,Spektrum. Anxious to see how it performs with these 17mm bore shocks ?

	(#1)
Bondonutz Fat Kid Engineering Offline Posts: 3,634 Join Date: Jun 2009 Location: Hot as Hell West Central Coast Florida	HOBAO Hyper 9E Build complete - 08.30.2009, 05:18 PM Just finished this afternoon, Happy to report this is a well built buggy and engineering is excellent. It comes ATR, The shocks have to built and electronics installed. I torn it down completely to change diff viscositys to 5K/F-5K/C-3K/R and checked all the hardware. It was all tight and loctite was used everywhere. They did a great job at the factory. The directions were a little hit and miss, a novice builder would find difficultys in some areas. Set up is as follows; NEU 1515-1Y & M.M.M. geared 40/13,weight is 7.5lbs w/4000mah 4s and body,JR DS8711,Spektrum. Anxious to see how it performs with these 17mm bore shocks ? I retired from RC, now life is all about guns and long range shooting.