RC-Monster Forums - View Single Post - Mamba Pro - for all you tech-heads

SpEEdyBL · 09.04.2009, 02:13 AM

Try using the highest timing possible when running novak type motors on the MM esc. There is about a 30 degree timing advance in the sensors so that is where you should shoot for.

I tested the rpm of my novak hv 7.5 on the Mamba Monster and the HV-Maxx esc. Unloaded kv on the MMM was about 2550 at zero degrees timing and 2600 with 10 degrees. On the hv-maxx, unloaded kv was around 2900.

	(#307)
SpEEdyBL "Out of spec" enthusiast Offline Posts: 820 Join Date: May 2005	09.04.2009, 02:13 AM Try using the highest timing possible when running novak type motors on the MM esc. There is about a 30 degree timing advance in the sensors so that is where you should shoot for. I tested the rpm of my novak hv 7.5 on the Mamba Monster and the HV-Maxx esc. Unloaded kv on the MMM was about 2550 at zero degrees timing and 2600 with 10 degrees. On the hv-maxx, unloaded kv was around 2900. Check out my custom converted 8ight: Sub 7lb, lowest CG of any 1/8 buggy http://www.rc-monster.com/forum/show...894#post367894 Area 52 Ranch Raceway T.R.C.R.