RC-Monster Forums - View Single Post - E Revo Center Diff questions and Opinions

Urgeoner · 02:11 PM

I wanted to use the bearing that fits around the steel end of the diff case so yes. I shimmed a bit much initially and it wasnt that strong so I JB'd it up.
I also used a bit of the 3/4" black plastic spacer found on the regular fixed output shaft. You can see it in the first picture, it helps with the end play by further reinforcing the output shaft.

	(#70)
Urgeoner RC-Monster Carbon Fiber Offline Posts: 368 Join Date: Feb 2009 Location: The Town, CA	09.06.2009, 02:10 PM I wanted to use the bearing that fits around the steel end of the diff case so yes. I shimmed a bit much initially and it wasnt that strong so I JB'd it up. I also used a bit of the 3/4" black plastic spacer found on the regular fixed output shaft. You can see it in the first picture, it helps with the end play by further reinforcing the output shaft. Last edited by Urgeoner; 09.06.2009 at 02:11 PM.