RC-Monster Forums - View Single Post

BrianG · 09.07.2009, 01:50 PM

Just an update: I found an extra tiny screw so I added it to bring the total to 3 screws. And when I took it apart, I found the red locktite didn't hold too well (so much for locktite tech support). So, I used JBweld after all.

And for the ultimate test, I bashed the heck out of the XT8 and everything held up. Play was stopped by an obliterated rear diff case (the part that attaches to the chassis, shocktower, etc).

	(#22)
BrianG RC-Monster Admin Offline Posts: 14,609 Join Date: Nov 2005 Location: Des Moines, IA	09.07.2009, 01:50 PM Just an update: I found an extra tiny screw so I added it to bring the total to 3 screws. And when I took it apart, I found the red locktite didn't hold too well (so much for locktite tech support). So, I used JBweld after all. And for the ultimate test, I bashed the heck out of the XT8 and everything held up. Play was stopped by an obliterated rear diff case (the part that attaches to the chassis, shocktower, etc).