RC-Monster Forums - View Single Post - Official Erevo 1/8 scale center diff thread

mistercrash · 09.11.2009, 08:55 AM

I don't use cutting oil when I make the holes in the spur with a carbide bit. I don't let the bit get warm and the metal is relatively thin. I would use cutting oil with cobalt bits. I used cutting oil when I made the threads, it's more like a wax. Something like this.

http://www.fastenal.com/web/products...3126544&ucst=t

	(#13)
mistercrash Guelph, Canada, eh! Offline Posts: 1,083 Join Date: Sep 2007 Location: Guelph, Ontario, Canada	09.11.2009, 08:55 AM I don't use cutting oil when I make the holes in the spur with a carbide bit. I don't let the bit get warm and the metal is relatively thin. I would use cutting oil with cobalt bits. I used cutting oil when I made the threads, it's more like a wax. Something like this. http://www.fastenal.com/web/products...3126544&ucst=t No brain, no headaches.