RC-Monster Forums - View Single Post

shaunjohnson · 09.11.2009, 09:59 PM

this must be a completely different principle but still...
the cruddy traxxas VXL speed controller has a stall protector doovit...
so when i gave rock crawling a bash with the rustler and the motor was on the brink of stalling or below a certain RPM threshhold the ESC cut power to the main board and would not give it back until the throttle deadband was re-set.

could this principle be manipulated to work when the motor is reving it's nuts off under load?

shaun

	(#7)
shaunjohnson i pwn nitro Offline Posts: 769 Join Date: Nov 2008 Location: with ur GF	09.11.2009, 09:59 PM this must be a completely different principle but still... the cruddy traxxas VXL speed controller has a stall protector doovit... so when i gave rock crawling a bash with the rustler and the motor was on the brink of stalling or below a certain RPM threshhold the ESC cut power to the main board and would not give it back until the throttle deadband was re-set. could this principle be manipulated to work when the motor is reving it's nuts off under load? shaun E-revo 3.3 conversion, 249kv outrunner, 6s, MMM the porthole from the noob world an here has been opened!! that's how i got in.