RC-Monster Forums - View Single Post - Official Erevo 1/8 scale center diff thread

simplechamp · 09.11.2009, 10:15 PM

Test fit confirms everything is A-OK including the shortened outputs. The screws are very close to the inside of the trans case, but a few shims on that end gave them enough clearance. Rotation is smooth all the way around with no binding. All there's left to do is fill it up with silicone oil and make sure everything seals up tight.

	(#33)
simplechamp RC-Monster Titanium Offline Posts: 1,884 Join Date: Jul 2009	09.11.2009, 10:15 PM Test fit confirms everything is A-OK including the shortened outputs. The screws are very close to the inside of the trans case, but a few shims on that end gave them enough clearance. Rotation is smooth all the way around with no binding. All there's left to do is fill it up with silicone oil and make sure everything seals up tight.