RC-Monster Forums - View Single Post

himalaya · 01:49 AM

alport, your missing part was a tantalum capacitor for the internal 12V generator, 22uF16V. Find one and solder it to the PCB, pay attention to its polarity when soldering.

brushlessboy16, your missing part was a muti-layer inductor, around 100uH. My first MMM V2 had this component failed also, just failed, no broken off, it had an internal short circuit making the motor no any action(no spin, no beep) but the LED and Castle Link still work. Go find one that little component and solder it back on, get a wire wound inductor if possible, much more reliable.

	(#13)
himalaya RC-Monster Carbon Fiber Offline Posts: 392 Join Date: Nov 2008	09.16.2009, 01:47 AM alport, your missing part was a tantalum capacitor for the internal 12V generator, 22uF16V. Find one and solder it to the PCB, pay attention to its polarity when soldering. brushlessboy16, your missing part was a muti-layer inductor, around 100uH. My first MMM V2 had this component failed also, just failed, no broken off, it had an internal short circuit making the motor no any action(no spin, no beep) but the LED and Castle Link still work. Go find one that little component and solder it back on, get a wire wound inductor if possible, much more reliable. ....What a Blue Sky.... Last edited by himalaya; 09.16.2009 at 01:49 AM.