RC-Monster Forums - View Single Post

Finnster · 09.21.2009, 10:21 PM

I was reading on a big Savage site a while back about people using all sorts of truggy and other 1/8 diffs in their Savs w/o a whole lot of luck. It seems like there is some inherent weakness in the case design that allows otherwise strong gears to strip more easily. The flux does have "HD" cases, but IDK if it makes a difference. It could be the Losis are so good as they are already in their own cases. Losi is likely SAE bearings and won't work w/ metric housings.

	(#51)
Finnster KillaHurtz Offline Posts: 2,958 Join Date: Apr 2006 Location: Bucks Co, PA	09.21.2009, 10:21 PM I was reading on a big Savage site a while back about people using all sorts of truggy and other 1/8 diffs in their Savs w/o a whole lot of luck. It seems like there is some inherent weakness in the case design that allows otherwise strong gears to strip more easily. The flux does have "HD" cases, but IDK if it makes a difference. It could be the Losis are so good as they are already in their own cases. Losi is likely SAE bearings and won't work w/ metric housings.