RC-Monster Forums - View Single Post

brushlessboy16 · 09.22.2009, 01:35 PM

If you have acces to a machine shop or a lathe. Bore a 5mm Hole through an aluminum blank- then turn it down to fit into the CLutch bell. set it with 2 part epoxy or high strength glue- CA might work?]]

Then just make the adapter to stickout of the Clutch bell so you can put a set screw on it

	(#7)
brushlessboy16 Im not dark, Im over ripened! xD Offline Posts: 5,607 Join Date: Sep 2007 Location: Westampton NJ	09.22.2009, 01:35 PM If you have acces to a machine shop or a lathe. Bore a 5mm Hole through an aluminum blank- then turn it down to fit into the CLutch bell. set it with 2 part epoxy or high strength glue- CA might work?]] Then just make the adapter to stickout of the Clutch bell so you can put a set screw on it Benjamin White R/c Monster Team Driver Jq the car, LST, Sportweks turmoil pro Unconventional Techniques, Superior Results