RC-Monster Forums - View Single Post - brushless 1/5 4wd conversion about to begin! couple questions.

Ryu James · 09.23.2009, 11:22 PM

so i went and picked up the castle bec pro good for up to 12s and 20 amps, which is very high amps for bec i am told. anyway, all my fans are 6v. i do have 12v fans too but currently my build makes use of 6v fans. my servos are the hpi sfl-30mg 1/5 size for steering and for brake i have available a futaba s9157 and a jr9100hvt. the jr is capable of using 7.4v input but the steering servo can only go up to 6v so i will probabaly use the fut s9157 as it is rated at 425oz at 6v and the jr is 403oz at 6v.

is it possible to run 7.4v to one servo and just 6v to the other?

	(#495)
Ryu James Second place is the first loser! Offline Posts: 899 Join Date: Sep 2008 Location: Utah	09.23.2009, 11:22 PM so i went and picked up the castle bec pro good for up to 12s and 20 amps, which is very high amps for bec i am told. anyway, all my fans are 6v. i do have 12v fans too but currently my build makes use of 6v fans. my servos are the hpi sfl-30mg 1/5 size for steering and for brake i have available a futaba s9157 and a jr9100hvt. the jr is capable of using 7.4v input but the steering servo can only go up to 6v so i will probabaly use the fut s9157 as it is rated at 425oz at 6v and the jr is 403oz at 6v. is it possible to run 7.4v to one servo and just 6v to the other? Jammin SCRT10 Neu 1512 1y Losi Ten-T SCT conversion Neu 1512 1y