RC-Monster Forums - View Single Post - Motor / Esc for RC8T-e

Nard Cox · 05:06 AM

But with lower mAh packs you need to be sure that the C rating is higher enough to still produce the minimal A recommended or does this also decrese? Like with the Flux they recommend getting 120A at least. So with a 4000mAh LiPo I would need to have at least 30C to still get that 120A. Or does this 120A also decreases?

I've never driven on a real RC track before. Till now I've just been bashing my cars (nothing extreme). But last weekend we made a little 'track' on the BMX track and we just raced (who could finish 3 laps the fastest for example). It was so much fun that I decided I wanted a good racing truggy to hit the tracks someday.

	(#7)
Nard Cox n00b Offline Posts: 519 Join Date: Apr 2009 Location: The Netherlands	09.24.2009, 07:36 PM But with lower mAh packs you need to be sure that the C rating is higher enough to still produce the minimal A recommended or does this also decrese? Like with the Flux they recommend getting 120A at least. So with a 4000mAh LiPo I would need to have at least 30C to still get that 120A. Or does this 120A also decreases? I've never driven on a real RC track before. Till now I've just been bashing my cars (nothing extreme). But last weekend we made a little 'track' on the BMX track and we just raced (who could finish 3 laps the fastest for example). It was so much fun that I decided I wanted a good racing truggy to hit the tracks someday. Mugen MBX6Te RCM + Mugen MBX6e RCM + Savage Flux XL FLM + MERV all with Spectrum DX3S \|\| WTS&WTB Last edited by Nard Cox; 09.25.2009 at 05:06 AM.