RC-Monster Forums - View Single Post - Installing Brass Threaded insert into chassis

Gee · 09.28.2009, 06:38 PM

Thanks for the input fellows. I also emailed Tony Screws and asked about the inserts I received from him and this is the reply he sent to me....

Hi Guy,

Thanks for the kind words.

3mm Inserts - Use a 5/32" drill bit
4mm Inserts - Use a 7/32" drill bit

Just drill the hole, press them in and insert a screw. The insert will
expand and lock into place. Have a GREAT weekend!

Thanks and best regards,

Tony Peczinka
Tonys Screws LLC

Next time the bulk head is opened up I will be putting some in. Thanks.

	(#7)
Gee A Horse's Ass Offline Posts: 1,065 Join Date: Oct 2007 Location: Spokane WA	09.28.2009, 06:38 PM Thanks for the input fellows. I also emailed Tony Screws and asked about the inserts I received from him and this is the reply he sent to me.... Hi Guy, Thanks for the kind words. 3mm Inserts - Use a 5/32" drill bit 4mm Inserts - Use a 7/32" drill bit Just drill the hole, press them in and insert a screw. The insert will expand and lock into place. Have a GREAT weekend! Thanks and best regards, Tony Peczinka Tonys Screws LLC Next time the bulk head is opened up I will be putting some in. Thanks.