Thread
:
brushless 1/5 4wd conversion about to begin! couple questions.
View Single Post
(#
548
)
Ryu James
Second place is the first loser!
Offline
Posts: 899
Join Date: Sep 2008
Location: Utah
09.29.2009, 11:23 PM
as before the 15t just performs so much better. it is so much quieter than the longshank 12t pinion, has more punch off the line and more top end of course. it is super smooth. it was a balmy 70* today and temps with the 15t were great. again, after moderate running the esc hadnt broke 95* so i rallied it pretty good for about 7 minutes doing donuts and drifting and taking through the grass at high speeds. i checked temps and esc was 105*, motor was 114* and batts and bec were 85*. i am gonna stick with the 15t and although i know i can get the temps higher when i get out and run it hard when i have brakes i am confident things will stay in the ideal temperature range. i am very happy. for the most part it performs like my truggies in just about every way but the steering servo has hardly any throw at all. it sucks. i think i am gonna rig a way to just use my JR9100HVT for steering. it has way more torque than the hpi large servo and a lot more throw also.
Jammin SCRT10 Neu 1512 1y
Losi Ten-T SCT conversion Neu 1512 1y
Last edited by Ryu James; 09.29.2009 at
11:28 PM
.
Ryu James
View Public Profile
Visit Ryu James's homepage!
Find all posts by Ryu James