RC-Monster Forums - View Single Post

J57ltr · 09.30.2009, 11:33 PM

Ya Dean said it was. I went ahead and measured and it's .108", that's a lot of shims (the are about .015" thick). So about 7 shims a side. I noticed that the bushings for the steering linkage seem to fit, but they interfere with the sheild of the bearing. The inner race on the Duratrax seem to have a thin inner race.

Jeff

	(#1)
J57ltr RC-Monster Aluminum Offline Posts: 610 Join Date: Feb 2009 Location: Tomball/ Houston Tx.	09.30.2009, 11:33 PM Ya Dean said it was. I went ahead and measured and it's .108", that's a lot of shims (the are about .015" thick). So about 7 shims a side. I noticed that the bushings for the steering linkage seem to fit, but they interfere with the sheild of the bearing. The inner race on the Duratrax seem to have a thin inner race. Jeff The Warnings & Cautions discussed in this manual cant cover all possible conditions/situations. It must be understood that common sense and caution are factors which cant be built into this product.