RC-Monster Forums - View Single Post - 1/16 Mini E-Revo

kazuaki · 10.01.2009, 02:13 AM

OK, so here are some pics that get you caught up to the current state of things. I'm using a Pro-Line Slipstream body that I did some creative trimming on. The idea is to keep it aerodynamic. Not really sure if I achieved that, but it looks cool. The suspension is "tied down" to keep the chassis low. There is still another 1/2" to 3/4" of travel left.

With HPI Super Nitro belted slicks on Super Star wheels...

Here are a few with some custom made foams on stock wheels...

	(#5)
kazuaki RC-Monster Carbon Fiber Offline Posts: 175 Join Date: Jun 2009 Location: Murrieta, CA	10.01.2009, 02:13 AM OK, so here are some pics that get you caught up to the current state of things. I'm using a Pro-Line Slipstream body that I did some creative trimming on. The idea is to keep it aerodynamic. Not really sure if I achieved that, but it looks cool. The suspension is "tied down" to keep the chassis low. There is still another 1/2" to 3/4" of travel left. With HPI Super Nitro belted slicks on Super Star wheels... Here are a few with some custom made foams on stock wheels...