RC-Monster Forums - View Single Post - Higher pinions = safer MMM's? Or no? Someone's lying....

Arct1k · 01:58 PM

Brian - Effectively that is what the Novak Transcap does if i'm not mistaken...

http://www.shopatron.com/products/pr...ber=5685/135.0

Description

This is a Power Trans-Cap Module for use in high-voltage applications with an input voltage range from 4S to 6S Li-Po. This module includes an 1,800µF power capacitor rated at 35V and includes two transorbs to reduce ESC temperatures and provide protection for the ESC. This module is factory wired with 4 inches of red and black 16-gauge silicone wire, and solders directly to the ESC’s positive and negative battery solder tabs. Module is rated for use with 4-6S Li-Po packs. Exceeding this input voltage will damage the module.

	(#11)
Arct1k RC-Monster Mod Offline Posts: 6,597 Join Date: Apr 2007 Location: NJ	10.01.2009, 01:57 PM Brian - Effectively that is what the Novak Transcap does if i'm not mistaken... http://www.shopatron.com/products/pr...ber=5685/135.0 Description This is a Power Trans-Cap Module for use in high-voltage applications with an input voltage range from 4S to 6S Li-Po. This module includes an 1,800µF power capacitor rated at 35V and includes two transorbs to reduce ESC temperatures and provide protection for the ESC. This module is factory wired with 4 inches of red and black 16-gauge silicone wire, and solders directly to the ESC’s positive and negative battery solder tabs. Module is rated for use with 4-6S Li-Po packs. Exceeding this input voltage will damage the module. Last edited by Arct1k; 10.01.2009 at 01:58 PM.