RC-Monster Forums - View Single Post

Brian · 10.04.2009, 08:33 PM

The my shafts are about 13cm from pin to tip (+\- approx. 1\2-1 mm) and my shafts work just as JThiessen described above. and yes according to losi the 2.0 arms are supposed to be a couple millimeters longer than the 1.0. they also look slightly different

1.0 arms
http://www.horizonhobby.com/Products...rodID=LOSA1702

2.0 arms
http://www.horizonhobby.com/Products...rodID=LOSA1704

Hope this helps!

	(#15)
Brian RC-Monster Stock Offline Posts: 18 Join Date: Apr 2009 Location: middle Georgia	10.04.2009, 08:33 PM The my shafts are about 13cm from pin to tip (+\- approx. 1\2-1 mm) and my shafts work just as JThiessen described above. and yes according to losi the 2.0 arms are supposed to be a couple millimeters longer than the 1.0. they also look slightly different 1.0 arms http://www.horizonhobby.com/Products...rodID=LOSA1702 2.0 arms http://www.horizonhobby.com/Products...rodID=LOSA1704 Hope this helps! XXX-T RTR / Novak XBR 10.5 8ight-t 1.0 / / mmm / 4s