|
10.05.2009, 08:24 PM
If it's the outer rear hinge pin, then yes they bend easy. You can upgrade to the 2.0 hinge pin by drilling out the holes in your existing arms.
E-CRT.5 Monster - RCM chassis, MM/Medusa 50x3300/3s, truck tires, 1/8 shocks
E-CRT.5 Stock - Sidewinder/4600/2s, buggy tires
E-8ight - Tekin RX8 2000kv/4S
E-8ight T- Tekin RX8 1700kv/5S
|