RC-Monster Forums - View Single Post - elc. conversion project done right... with an 808

rootar · 10.09.2009, 07:11 PM

i hate the one screw mounts, i just dont trust them... and most will need replaced in one season due to the slop. You want a light weight easy to work on on buggy take a look at my 808 you remove 4 screws and loose the two motor screw a half turn, and cut one zip tie on the rx and bingo you have just stripped the entire car's electronics, dont unplug anything just comes right off.....in less than minute, makes its SOOO easy to clean between rounds.

	(#11)
rootar RC-Monster Titanium Offline Posts: 1,803 Join Date: Aug 2005 Location: arkansas	10.09.2009, 07:11 PM i hate the one screw mounts, i just dont trust them... and most will need replaced in one season due to the slop. You want a light weight easy to work on on buggy take a look at my 808 you remove 4 screws and loose the two motor screw a half turn, and cut one zip tie on the rx and bingo you have just stripped the entire car's electronics, dont unplug anything just comes right off.....in less than minute, makes its SOOO easy to clean between rounds.