RC-Monster Forums - View Single Post

shaunjohnson · 11.03.2009, 06:05 PM

with a little thinking you can charge the 2 packs at the same time...
the charger will see them as a 6s pack.

you will need to make an adapter for the balance lead, so cells 1, 2 and 3 are immediately followed by the other pack's 1, 2 and 3 cells, then rig up a common ground, connect the packs in series with deans adapters etc and you have a saddle pack.

here's the catch those 2 packs MUST ALWAYS be used together no matter what! you wont be able to put one in your rustler and run that, they are always connected as a 6s pack.

	(#6)
shaunjohnson i pwn nitro Offline Posts: 769 Join Date: Nov 2008 Location: with ur GF	11.03.2009, 06:05 PM with a little thinking you can charge the 2 packs at the same time... the charger will see them as a 6s pack. you will need to make an adapter for the balance lead, so cells 1, 2 and 3 are immediately followed by the other pack's 1, 2 and 3 cells, then rig up a common ground, connect the packs in series with deans adapters etc and you have a saddle pack. here's the catch those 2 packs MUST ALWAYS be used together no matter what! you wont be able to put one in your rustler and run that, they are always connected as a 6s pack. E-revo 3.3 conversion, 249kv outrunner, 6s, MMM the porthole from the noob world an here has been opened!! that's how i got in.