[suicideneil]

Interesting- most people have the opposite problem with the LVC kicking in too late unless they raise it up around 3.4-3.6v per cell.

Umm, try dropping it down to 3.0v per cell, same as the auto-lipo setting, see what it does then; you should notice the power start to drop off as the lipo becomes depleted, so stop running it anyway if thne lvc hasnt kicked in by then- thasts what I do with my zippy-h lipos and I haven't had any issues thus far (The Force lets me know when the lipos are approaching ~3v per cell, but they still rebound back to about 3.3-3.5v once you take the load off them....).