RC-Monster Forums - View Single Post

scarletboa · 03:07 AM

i ended up getting the MMM and i couldn't be more satisfied with it. i have about 4-5 hours of runtime on it and it runs very nicely. the programming features are a huge plus too. it is mostly used in my 10lb CEN matrix geared for ~9.5mph per lipo cell. i popped my 2 3s packs in for a few 60mph passes with heavy braking and the esc didn't break a sweat. (other than the fan being on after about 10 passes)

my setup is pretty heavy and most of it's runtime has been on 3s and 4s. the fan is on about 50-60% of the time after the 5 minute mark. i didn't realize that it would be pushed so hard in a buggy. i don't know how to temp the esc, but my 2000kv medusa runs around 150F on 4s after 20 minutes.

long story short, i now see why the MMM is a little more expensive than the EZrun despite similar FETs and specs. the MMM is smaller, more programmable, has MUCH better cs, and is so much smoother.

A+

	(#5)
scarletboa RC-Monster Aluminum Offline Posts: 929 Join Date: Mar 2009 Location: Las Vegas NV	11.15.2009, 03:05 AM i ended up getting the MMM and i couldn't be more satisfied with it. i have about 4-5 hours of runtime on it and it runs very nicely. the programming features are a huge plus too. it is mostly used in my 10lb CEN matrix geared for ~9.5mph per lipo cell. i popped my 2 3s packs in for a few 60mph passes with heavy braking and the esc didn't break a sweat. (other than the fan being on after about 10 passes) my setup is pretty heavy and most of it's runtime has been on 3s and 4s. the fan is on about 50-60% of the time after the 5 minute mark. i didn't realize that it would be pushed so hard in a buggy. i don't know how to temp the esc, but my 2000kv medusa runs around 150F on 4s after 20 minutes. long story short, i now see why the MMM is a little more expensive than the EZrun despite similar FETs and specs. the MMM is smaller, more programmable, has MUCH better cs, and is so much smoother. A+ They say a good mechanic only needs 2 tools - WD40 & Duct tape. If it moves, and its not supposed to, duct tape. If it doesn't move, and its supposed to, WD40. Last edited by scarletboa; 11.15.2009 at 03:07 AM.