RC-Monster Forums - View Single Post

stum · 05:05 PM

a lil dirty.. The rx is just on the side of the ESC, I used the nitro fuel guard to make a small stop to keep crap from blowing up in and getting on the ESC and rx. Worked very well just screwed it into the tekno mount. I also hacked off about 1/4" of height w/ my dremel on that platform tekno sent that the ESC sits on.

Another way to do it if you have a small ESC or the room is how I did my 8ight-t

	(#7)
stum RC-Monster Aluminum Offline Posts: 603 Join Date: Jan 2008	11.20.2009, 05:02 PM a lil dirty.. The rx is just on the side of the ESC, I used the nitro fuel guard to make a small stop to keep crap from blowing up in and getting on the ESC and rx. Worked very well just screwed it into the tekno mount. I also hacked off about 1/4" of height w/ my dremel on that platform tekno sent that the ESC sits on. Another way to do it if you have a small ESC or the room is how I did my 8ight-t 8ight-e (B&T) MMM - Hyperion Lipos Ofna Hyper SC 10 Pro - Medusa 4800kv Last edited by stum; 11.20.2009 at 05:05 PM.