RC-Monster Forums - View Single Post

Bondonutz · 07:07 PM

Sikes,
Thank You Sir,
Reverse is at 50%
Direction- Nah, Thats all good. The power is not so much a issue because I have the settings cranked down. It's the motor temp and lack of speed verses the calculator that's puzzleing me ? Even with the setting like they are the top speed "should" exceed what it does .

Ya know, I just commented in another thread about lipo temps being a issue. Even though my packs were in the house maybe the temp is just low enough to have a factor for these older packs I'm using for this application to cause this power loss and motor temp ? Need a big brain to comment on this? Where you at BrianG ?

	(#3)
Bondonutz Fat Kid Engineering Offline Posts: 3,634 Join Date: Jun 2009 Location: Hot as Hell West Central Coast Florida	12.06.2009, 07:02 PM Sikes, Thank You Sir, Reverse is at 50% Direction- Nah, Thats all good. The power is not so much a issue because I have the settings cranked down. It's the motor temp and lack of speed verses the calculator that's puzzleing me ? Even with the setting like they are the top speed "should" exceed what it does . Ya know, I just commented in another thread about lipo temps being a issue. Even though my packs were in the house maybe the temp is just low enough to have a factor for these older packs I'm using for this application to cause this power loss and motor temp ? Need a big brain to comment on this? Where you at BrianG ? I retired from RC, now life is all about guns and long range shooting. Last edited by Bondonutz; 12.06.2009 at 07:07 PM.