RC-Monster Forums - View Single Post

Unsullied_Spy · 01:45 AM

I'm curious why they would put a 6mm shaft on it, they are basically building it for US and other future RC-M nut jobs and we all run 5mm shafts. If it has something to do with a helicopter needing a 6mm shaft or something, put that shaft on the Heli version with the ground down fins and give us the 5mm shaft! I'm not going to pitch a huge fit over it because I bought the motor before there was anything really known about it (said 5mm shaft on the chart, but it wasn't the only error) because I had faith in CC that they wouldn't do something so stupid as to give us the shaft like this.

	(#211)
Unsullied_Spy RC-Monster Titanium Offline Posts: 1,609 Join Date: Aug 2008 Location: Bozeman, Montana	12.11.2009, 12:02 AM I'm curious why they would put a 6mm shaft on it, they are basically building it for US and other future RC-M nut jobs and we all run 5mm shafts. If it has something to do with a helicopter needing a 6mm shaft or something, put that shaft on the Heli version with the ground down fins and give us the 5mm shaft! I'm not going to pitch a huge fit over it because I bought the motor before there was anything really known about it (said 5mm shaft on the chart, but it wasn't the only error) because I had faith in CC that they wouldn't do something so stupid as to give us the shaft like this. All I ever wanted was an honest weeks pay for an honest days work. Last edited by Unsullied_Spy; 12.11.2009 at 01:45 AM.