RC-Monster Forums - View Single Post - MM Pro BEC not holding voltage under load

BrianG · 12.15.2009, 12:18 PM

Yeah, you can add a 1,000-2,200uF capacitor rated for 10v or more on any unused receiver port. This will help provide extra current for those bursts.

Or, use an external, beefier BEC.

	(#6)
BrianG RC-Monster Admin Offline Posts: 14,609 Join Date: Nov 2005 Location: Des Moines, IA	12.15.2009, 12:18 PM Yeah, you can add a 1,000-2,200uF capacitor rated for 10v or more on any unused receiver port. This will help provide extra current for those bursts. Or, use an external, beefier BEC.