RC-Monster Forums - View Single Post

Unsullied_Spy · 12.30.2009, 02:02 PM

Dan @ Keshaw Designs and SDP-Si.com are the only places I know of that sell them. I had a 21 or 22 tooth brass pinion that was 5mm bore but the grub screw rounded out and I had to cut the gear off. If I still have the gear you can have it and use some loctite 604 to stick it to your shaft.

	(#1)
Unsullied_Spy RC-Monster Titanium Offline Posts: 1,609 Join Date: Aug 2008 Location: Bozeman, Montana	12.30.2009, 02:02 PM Dan @ Keshaw Designs and SDP-Si.com are the only places I know of that sell them. I had a 21 or 22 tooth brass pinion that was 5mm bore but the grub screw rounded out and I had to cut the gear off. If I still have the gear you can have it and use some loctite 604 to stick it to your shaft. All I ever wanted was an honest weeks pay for an honest days work.