RC-Monster Forums - View Single Post

sikeston34m · 01.04.2010, 08:42 AM

The setup got changed around again.

This time, with the goal of getting amp draw down to a decent level while maintaining a good level of performance.

The setup is:

E Revo
MM Pro (lowest timing, 100% punch control)
5S 20C 5000mah Turnigy
Medusa 36-70-2000 geared 14/52 (around 35mph)

This setup performs well. Top Speed sees the motor spinning around 38000rpm.

I tried this setup on 4S (Top Speed 28mph), and the graph from it is almost identical to the 5S Graph. Hmmmmm.......... I wonder what it would do on 6S? Don't have the 6S setup at the moment, but it does have me curious.

Most of the spikes are right around 65-70 amps. This should be accurate for the logger since it isn't exceeding 100 amps.

	(#3)
sikeston34m RC-Monster Brushless Offline Posts: 2,085 Join Date: Sep 2007	01.04.2010, 08:42 AM The setup got changed around again. This time, with the goal of getting amp draw down to a decent level while maintaining a good level of performance. The setup is: E Revo MM Pro (lowest timing, 100% punch control) 5S 20C 5000mah Turnigy Medusa 36-70-2000 geared 14/52 (around 35mph) This setup performs well. Top Speed sees the motor spinning around 38000rpm. I tried this setup on 4S (Top Speed 28mph), and the graph from it is almost identical to the 5S Graph. Hmmmmm.......... I wonder what it would do on 6S? Don't have the 6S setup at the moment, but it does have me curious. Most of the spikes are right around 65-70 amps. This should be accurate for the logger since it isn't exceeding 100 amps.