[V0RT3X]

Originally Posted by mistercrash

I put my new lifepo4 Turnigys on the CBA analyzer and this is what came out.

LiFePO4 1:
Discharge rate: 9.60 A
Starting voltage: 10.30 V
Ending voltage: 7.30 V
Total time: 26 minutes 49 seconds
Tested capacity: 4586 mah



LiFePO4 2:
Discharge rate: 9.60 A
Starting voltage: 10.40 V
Ending voltage: 7.30 V
Total time: 25 minutes 41 seconds
Tested capacity: 4105 mah



And the two graphs overlay ed



There's a small difference in the two as far as run time and capacity. I will analyze these packs again after they have a few cycles through them to see if they get better.

Some more data.