RC-Monster Forums - View Single Post

What's_nitro? · 01.11.2010, 01:27 PM

Yeah 1M = M1. Don't know why it's shown that way, probably a typo.

Do your e-revo and hyper use the same motor? That may be why one freewheels more than the other. Try swapping them if they are different.

Just to be clear- the hyper will freewheel just fine with no pinion on the motor- and there is no resistance in the motor except for the magnetic cogging, right? Try setting a loose gear mesh and give it a shove across the floor. It should go about 10-15 feet with a firm push.

	(#37)
What's_nitro? Soldermaster Extraordinaire Offline Posts: 4,529 Join Date: Apr 2007 Location: Plymouth, MA, USA	01.11.2010, 01:27 PM Yeah 1M = M1. Don't know why it's shown that way, probably a typo. Do your e-revo and hyper use the same motor? That may be why one freewheels more than the other. Try swapping them if they are different. Just to be clear- the hyper will freewheel just fine with no pinion on the motor- and there is no resistance in the motor except for the magnetic cogging, right? Try setting a loose gear mesh and give it a shove across the floor. It should go about 10-15 feet with a firm push.