RC-Monster Forums - View Single Post - Lightning 2 Pro carbon rallygame conversion

nativepaul · 01.15.2010, 06:03 PM

The buggy as it came.

After rough cutting the centre diff top brace and servo plate the 7075 the L2P is made from is tough stuff and my dremmel kept on overheating whilst cutting it.

Measurements found the L2P to have a narrower chassis than the LSP and Mike's original style mount was 8mm to wide for the buggy chassis and I will have to chop the corner off it, Mike's new style LSP mounts are rounded at the end and i dont think they will need any modification.

I cleaned up the metalwork I did earlier and refitted it.

I fitted the rear wing.

And applied a selection of the decals to the body.

	(#2)
nativepaul RC-Monster Aluminum Offline Posts: 522 Join Date: Jan 2007 Location: Sussex, England.	01.15.2010, 06:03 PM The buggy as it came. After rough cutting the centre diff top brace and servo plate the 7075 the L2P is made from is tough stuff and my dremmel kept on overheating whilst cutting it. Measurements found the L2P to have a narrower chassis than the LSP and Mike's original style mount was 8mm to wide for the buggy chassis and I will have to chop the corner off it, Mike's new style LSP mounts are rounded at the end and i dont think they will need any modification. I cleaned up the metalwork I did earlier and refitted it. I fitted the rear wing. And applied a selection of the decals to the body. Hot Bodies Lightning 2 Pro carbon, Mega 22/30/2, MMM, 4s3-5Ah. Tamiya F201 carbon, Mamba 7700, MM, 2s A123 2.3ah. Xray XT8, 1518, MMM, 4s5Ah. Lots of boats. fastelectrics.net