RC-Monster Forums - View Single Post

hooppjs · 01.21.2010, 10:03 PM

Here's the last monster. I go into the hobby shop with wallet and this happens!

Eyeball this and that, never again. I'll only take a $20 from now on.
The little Losi 1/18 Mini Slider was on special. It's a rtr, slide car with 2.4gHz radio. My mate has the mini baja I think, with VW body. We ran them stock with 280 brushed cans for awhile to great amusement and laughs. They were quite quick out of the box, using the 6 cell NiMh pack with brushed motor.

I ended up ordering the Exotek chassis conversion kit.

Extends the slider chassis to Mini late model spec. You beaut graphite too:) The guy I ordered my Neu motor off, recommended a Razor RZ300 motor. It is very small, I thought too small, for my mini slider? Anyway, the instructions were from Mr S. Neu and said this motor is a direct replacement for 280 size brushed motors. I am again using the CC's Micro Pro esc and a rhino 2s - 1750MaH lipo. I changed the stock 16t losi pinion to a steel 16t aftermarket one. I made a motor guard, as the RZ motor is vented and put a front bumper on to save the exposed wheels. All else stock. The losi radio works with the CC micro pro/Razor motor.
I didn't want the car to be overpowered like the Xray, thus 4900-5000kv RZ300 motor. It is a really great little motor matched with the CC micro pro.
The slider will mono on the road, when pushed. It would be approx 25% more power than stock, maybe more. That's what I wanted.

You know when you see the slide cars in real life and they will actually pull small wheelies, due to power.
Here are shots for slider fans. Tried to leave it stock externally, except for a few stickers.
I would also like to say, that Mike from Exotek is a real nice guy. Looked after me from Cal and I'm in Sydney. Fast post, fast.

Thanks
Peter

	(#4)
hooppjs RC-Monster Stock Maggot Offline Posts: 68 Join Date: Nov 2009 Location: Sydney Australia	01.21.2010, 10:03 PM Here's the last monster. I go into the hobby shop with wallet and this happens! Eyeball this and that, never again. I'll only take a $20 from now on. The little Losi 1/18 Mini Slider was on special. It's a rtr, slide car with 2.4gHz radio. My mate has the mini baja I think, with VW body. We ran them stock with 280 brushed cans for awhile to great amusement and laughs. They were quite quick out of the box, using the 6 cell NiMh pack with brushed motor. I ended up ordering the Exotek chassis conversion kit. Extends the slider chassis to Mini late model spec. You beaut graphite too:) The guy I ordered my Neu motor off, recommended a Razor RZ300 motor. It is very small, I thought too small, for my mini slider? Anyway, the instructions were from Mr S. Neu and said this motor is a direct replacement for 280 size brushed motors. I am again using the CC's Micro Pro esc and a rhino 2s - 1750MaH lipo. I changed the stock 16t losi pinion to a steel 16t aftermarket one. I made a motor guard, as the RZ motor is vented and put a front bumper on to save the exposed wheels. All else stock. The losi radio works with the CC micro pro/Razor motor. I didn't want the car to be overpowered like the Xray, thus 4900-5000kv RZ300 motor. It is a really great little motor matched with the CC micro pro. The slider will mono on the road, when pushed. It would be approx 25% more power than stock, maybe more. That's what I wanted. You know when you see the slide cars in real life and they will actually pull small wheelies, due to power. Here are shots for slider fans. Tried to leave it stock externally, except for a few stickers. I would also like to say, that Mike from Exotek is a real nice guy. Looked after me from Cal and I'm in Sydney. Fast post, fast. Thanks Peter 100% recycled electrons were used in this message.