Quote:
Originally Posted by stum
I've had this in my basket at towers for a few months now.. I've had an itch to buy something and after reading the article it was the nudge I needed to click the 'complete order' button :) 299-60 w/ free ship :) Already have a couple spare MMM's and 2200kv (1y) systems laying around as well as extra servo's and spektrum rx's so I'm good to go :)
I also used a-main for a box of parts and a few hop ups..
1 x HBS67562 Hot Bodies Pinion Gear (18T) $8.49
1 x HBS67580 Hot Bodies Aluminum Front Skid Plate $15.49
1 x HBS67581 Hot Bodies Aluminum Rear Skid Plate $17.99
1 x HBS67388 Hot Bodies Front Spindle Set $8.49
2 x HBS67758 Hot Bodies Megabite 1/8 Buggy Tire (Red) (2) $33.98
1 x HBS67575 Hot Bodies Ve8 Clear Body $23.99
1 x HBS66898 Hot Bodies 3.7x80mm Factory Turnbuckle Wrench $11.49
1 x HBS67516 Hot Bodies Rod End Set (8) $3.89
1 x HBS67350 Hot Bodies Shock Boots Set (4) $3.89
1 x HBS67351 Hot Bodies Shock End & Spring Retainer Set $3.89
2 x HBS67515 Hot Bodies Big Bore Shock Maintenance Set $11.98
1 x LOSA4463 Team Losi Battery Straps (3) $10.25
Sub-Total: $153.82
Super Saver Shipping - UPS Ground - FREE!: $0.00
Discount Coupons (CALPJAN1012): $-12.50
Total: $141.32
Enough spent.. wife will most likely have a cow :) But I'm ready for the spring!! 3 more months..
- Any install tips etc during the build? stock oils all been nice on the track?
- Any other must have parts for the tool box when racing? LHS doesnt carry anything for this buggy... thanks!
|
I've built two of these . One for me & one for a customer at the LHS were i work part time . The only thing i noticed is some very slight rubbing with the spur or the center diff cup . Both were fixed very easy . On the diff cup were the set screw goes in to seal the cup was rubbing on the edge of the radio box . A little work with a small file & all is good. On the spur i just opened up the chassis slot & the sides a little. I also trimmed a little of the top plate were the spur runs thru. you will see were to clean it up if nessesary.