RC-Monster Forums - View Single Post

simplechamp · 01.28.2010, 04:08 PM

They should all be the same brightness in the current wiring config. I would check the solder joints, might have a bad/cold solder that's dropping a bit of voltage and the LEDs on that segment aren't getting as much.

	(#6)
simplechamp RC-Monster Titanium Offline Posts: 1,884 Join Date: Jul 2009	01.28.2010, 04:08 PM They should all be the same brightness in the current wiring config. I would check the solder joints, might have a bad/cold solder that's dropping a bit of voltage and the LEDs on that segment aren't getting as much.