Quote:
Originally Posted by mistercrash
I like conversions as much as BrianG likes fans  I just sent another email to Vantage begging them to make a chassis for the E-Revo with low CG and two spaces of 170 mm X 54 mm X 50 mm for lipos. And I asked them to do it now  And send me the first one for testing  |
MC,
I think I had posted to you on revo-world, but I had inquired of Vantage a long time ago to get a prototype run. When I checked in with them in May, this was the status:
Hi George,
The CAD is still in the work. We will try to come up with a plan on this and post it on our website and send out emails when it's up. Thank you for your participation.
Vantage Racing Inc.
They needed a deposit up front and 100 orders within a month to be viable; unfortunately, I couldn't get enough funding/interest for it, and when I last checked with them last fall, this is what they said:
Hi George,
Unfortunately we did not accumulate enough demand for these to put it into production. However, we will have a new brushless Electric 1/10 truck out before Christmas, please check back on our website often. Thank you.
Vantage Racing
Obviously, they didn't do this either, so I'd be awfully curious if they would consider another go at the chassis. You get enough hits on your two threads that it may be viable...