RC-Monster Forums - View Single Post

scarletboa · 02.07.2010, 03:56 AM

i want to try 8-10s in my buggy with both a cheap chinese motor and a nice high quality neu. i wonder if 8s is too much for the 1800kv 1512 neu-castle motor. it's "only" 53k rpms. if it is too much, i could always run 8-10s in a 1512 2y.

i crave high voltage setups like crack. i ran 6s in a rustler vxl. i used a cheap chinese plane esc with a 1500kv chinese motor....until the rotor separated from the shaft...
my savage would be running 24s lipo if i had a low enough kv motor and a capable esc. i have seriously considered putting 6s in a rc18t or a mini e-revo. i will most likely be getting a MMP real soon so i can run 6s in my blitz.

c'mon pat, we need a 8-12s capable castle esc. the current hv speed controls on the market right now are very pricey and not so reliable. also, NOTHING on the market right now does 8-12s AND data logging.

	(#11)
scarletboa RC-Monster Aluminum Offline Posts: 929 Join Date: Mar 2009 Location: Las Vegas NV	02.07.2010, 03:56 AM i want to try 8-10s in my buggy with both a cheap chinese motor and a nice high quality neu. i wonder if 8s is too much for the 1800kv 1512 neu-castle motor. it's "only" 53k rpms. if it is too much, i could always run 8-10s in a 1512 2y. i crave high voltage setups like crack. i ran 6s in a rustler vxl. i used a cheap chinese plane esc with a 1500kv chinese motor....until the rotor separated from the shaft... my savage would be running 24s lipo if i had a low enough kv motor and a capable esc. i have seriously considered putting 6s in a rc18t or a mini e-revo. i will most likely be getting a MMP real soon so i can run 6s in my blitz. c'mon pat, we need a 8-12s capable castle esc. the current hv speed controls on the market right now are very pricey and not so reliable. also, NOTHING on the market right now does 8-12s AND data logging.