RC-Monster Forums - View Single Post

_paralyzed_ · 02.15.2010, 04:38 PM

sounds like a glow plug to me. If you have access to a glow plug heater try revving it with the heater on, if it works then it's the glow plug.

never touch the low speed until the high speed is set. They work together and it is important to have the high speed set correctly first. If the high speed isn't right you'll just cause more trouble fiddling with the low speed.

if it's not the glow plug I suspect an air leak somewhere, or bad fuel. Fuel that sits min the tank will often have the alcohol evaporated out of it and it won't run worth a damn.

	(#12)
_paralyzed_ working on a brushless for my wheelchair..... Offline Posts: 4,890 Join Date: Mar 2007 Location: minnesnowta	02.15.2010, 04:38 PM sounds like a glow plug to me. If you have access to a glow plug heater try revving it with the heater on, if it works then it's the glow plug. never touch the low speed until the high speed is set. They work together and it is important to have the high speed set correctly first. If the high speed isn't right you'll just cause more trouble fiddling with the low speed. if it's not the glow plug I suspect an air leak somewhere, or bad fuel. Fuel that sits min the tank will often have the alcohol evaporated out of it and it won't run worth a damn. _______________________________________ It's "Dr. _paralyzed_" actually. Not like with a PhD, but Doctor like in Dr. Pepper.