RC-Monster Forums - View Single Post - Hot Bodies is having an online Garage Sale

scarletboa · 02:55 AM

i already stripped out a hex on my new tires

they are only 14mm, so i put a little jb weld between the hex piece and the wheel hex and i didn't use enough. maybe i can get some thick CA and cut a few slots in the wheel hex and glue the hex piece in place.

edit: also, i snapped a HPI super duty front driveshaft today as well. the tires weigh a TON and the truck must weigh at least 16lbs. nose wheelies from braking hard really takes a toll on the front drivetrain.

	(#30)
scarletboa RC-Monster Aluminum Offline Posts: 929 Join Date: Mar 2009 Location: Las Vegas NV	03.01.2010, 02:53 AM i already stripped out a hex on my new tires they are only 14mm, so i put a little jb weld between the hex piece and the wheel hex and i didn't use enough. maybe i can get some thick CA and cut a few slots in the wheel hex and glue the hex piece in place. edit: also, i snapped a HPI super duty front driveshaft today as well. the tires weigh a TON and the truck must weigh at least 16lbs. nose wheelies from braking hard really takes a toll on the front drivetrain. They say a good mechanic only needs 2 tools - WD40 & Duct tape. If it moves, and its not supposed to, duct tape. If it doesn't move, and its supposed to, WD40. Last edited by scarletboa; 03.01.2010 at 02:55 AM.