RC-Monster Forums - View Single Post - Losi Ten-T Conversion

RC-Monster Mike · 03.04.2010, 03:30 PM

ETA is VERY soon. I should have the basic conversion package done today or tomorrow if all goes well. The spur gears will be custom 52t mod .8 Delrin and will likely be the holdup on the kits in the end. A 12mm hex is an afterthought, but these trucks use a 6mm axle vs. the 5mm standard on the 12mm hex vehicles, so if a 12mm hex is used the wheels will need to be drilled out(and wheels must be 30 series as a 2.2 won't work as mentioned above). :)

	(#141)
RC-Monster Mike Site Owner Offline Posts: 4,915 Join Date: Nov 2004 Location: PA	03.04.2010, 03:30 PM ETA is VERY soon. I should have the basic conversion package done today or tomorrow if all goes well. The spur gears will be custom 52t mod .8 Delrin and will likely be the holdup on the kits in the end. A 12mm hex is an afterthought, but these trucks use a 6mm axle vs. the 5mm standard on the 12mm hex vehicles, so if a 12mm hex is used the wheels will need to be drilled out(and wheels must be 30 series as a 2.2 won't work as mentioned above). :)