So I wanted something a little different. I slammed the body by removing the rear body mount, and adding some posts in the holes in the shock tower. The front then got 1/4 in long cut down body posts. The body is a Crowd Pleazer from a Savage 25. I liked the body, but the bumpers were way to long. So I cut out the long extensions with the back bumper, and rescrewed it on to the cut off nubs. Seems very strong. For the front I cut off a big chunk, and mounted a RPM bumper from a Stampede. I used a pair of screws from the underneath into a couple nuts. The bumper rests inside the upper cushion bumper, so if it's hit hard enough it still works to absorb the blow, instead of transfering it all to the bottom skid.
I'm running a HV4.5 and a Xerun 80amp esc. Does very good for what I'm doing with it.