RC-Monster Forums - View Single Post - Losi Ten-T Conversion

BrianG · 10:08 PM

This truck has about the same loading characteristics as an 1/8 scale buggy. So, those Castle motors are much too small. However, the MMPro ESC should be fine if matched with a low kv (~1400kv) buggy-size motor (1512 series Neu or Castle, or Tekin equivalent, or as small as a 60mm Medusa) running on 5s or 6s geared for ~35-40mph.

	(#208)
BrianG RC-Monster Admin Offline Posts: 14,609 Join Date: Nov 2005 Location: Des Moines, IA	03.16.2010, 10:07 PM This truck has about the same loading characteristics as an 1/8 scale buggy. So, those Castle motors are much too small. However, the MMPro ESC should be fine if matched with a low kv (~1400kv) buggy-size motor (1512 series Neu or Castle, or Tekin equivalent, or as small as a 60mm Medusa) running on 5s or 6s geared for ~35-40mph. Last edited by BrianG; 03.16.2010 at 10:08 PM.