RC-Monster Forums - View Single Post - Talk 1520

magman · 08:21 PM

My 1520 is in my mbx5T on 5s geared 17 / 48. Runs cool as can be as I bash only.

Truck weight RTR is 11.5 lbs.

Setup:
mmm esc settings:

low start power
3.3 lvc
60% punch control ( may move i up to 70% )
60% brakes
no drag brake

diffs:

front 20WT.
center 20wt.
rear 7wt

With this diff set up there is almost no ballooning running Badland tires on Rulux 1/2" offset rims

5s turnigy 35c 5000mah li-po

	(#2)
magman RC-Monster Dual Brushless Offline Posts: 4,236 Join Date: Dec 2007 Location: Cape Cod, Mass.	03.21.2010, 08:18 PM My 1520 is in my mbx5T on 5s geared 17 / 48. Runs cool as can be as I bash only. Truck weight RTR is 11.5 lbs. Setup: mmm esc settings: low start power 3.3 lvc 60% punch control ( may move i up to 70% ) 60% brakes no drag brake diffs: front 20WT. center 20wt. rear 7wt With this diff set up there is almost no ballooning running Badland tires on Rulux 1/2" offset rims 5s turnigy 35c 5000mah li-po 1. MBX-6 T8 1900KV, RX8 ON 4S 2. MBX-5T 1520, MMM ON 5S 3. MBX-5 ONROAD CONVERSION 1515, MMM ON 5S 4. MRX-3 ON ROAD CONVERSION 1512, MMM ON 6S 5. TEN T 2650 T8, MMP ON 3S Last edited by magman; 03.21.2010 at 08:21 PM.