RC-Monster Forums - View Single Post - Talk 1520

SunnyHouTX · 03.24.2010, 10:32 AM

I have to side with nuz69 in this one magman. I've read posts, some by CC personnel, that 4-pole motors should have higher timing. 2-pole motors definitely should have 0 timing whenever possible (I run some timing in my drag set ups but that's another story because heat is not an issue there). I run my Medusa 36-70-2000 at 8 - 10 degrees and my CC/Neu 2200 at 10 degrees and that has given me best results for temps and run times.

	(#11)
SunnyHouTX 2010 Texas Worlds Top Fuel and Outlaw 10.5 Champ Offline Posts: 396 Join Date: Apr 2008	03.24.2010, 10:32 AM I have to side with nuz69 in this one magman. I've read posts, some by CC personnel, that 4-pole motors should have higher timing. 2-pole motors definitely should have 0 timing whenever possible (I run some timing in my drag set ups but that's another story because heat is not an issue there). I run my Medusa 36-70-2000 at 8 - 10 degrees and my CC/Neu 2200 at 10 degrees and that has given me best results for temps and run times. Quickest 1/10 Top Fuel Dragster