View Single Post
Old
  (#6)
scarletboa
RC-Monster Aluminum
 
scarletboa's Avatar
 
Offline
Posts: 929
Join Date: Mar 2009
Location: Las Vegas NV
04.03.2010, 02:47 AM

these chargers can handle the 200w limit just fine and even if they do get too hot, they will shut off automatically.

i got one of those cheap computer power supplies for $20 shipped off e-bay and it keeps up with the charger perfectly. it only gets warm to the touch when i am running the charger at the full 200w. the charger heats up to about 120F at most when charging at the full 200w.

http://cgi.ebay.com/Silent-600w-DUAL...ht_1769wt_1165
that is the power supply i have and what i did was connect the green wire from the big plug to one of the black wires and wired all of the remaining black wires and all of the yellow wires to bullet plugs and soldered some bullet plugs onto the esc as well and it works perfectly.


They say a good mechanic only needs 2 tools - WD40 & Duct tape. If it moves, and its not supposed to, duct tape. If it doesn't move, and its supposed to, WD40.
   
Reply With Quote